The Process

The Mad Scientist Header Coating Ceramic Coating Process

Ceramic Coating vs. Powder Coating

The Mad Scientist Rich Daly Applying the Ceramic Coating

The Mad Scientist Rich Daly Applying the Ceramic Coating

Ceramic Coated Headers in the Oven

After headers are painted in the ceramic coating, they are put into an oven to bake for around an hour.

Powder coating is an electrostatically applied paint process that is then baked @ 160° C to 210° C giving a surface that will not crack, chip or peel like conventional paint. Powder coating is commonly used on frames, wheels, parts & some intake manifolds.

Ceramic coating is a process where the part is sandblasted, painted with the ceramic, baked for 1 hour @ 500 degrees, and finally, polished in a tumbler for half an hour. Ceramic coating is used mainly on exhaust headers and turbo housings due to its ability to hold up under extreme heat. Standard ceramic coating is good to 1300° F, and ceramic coating for turbo or nitrous motors is good to 1700° F.

Mad Scientist Header Coating is your number source for professionally quality Ceramic Coating, with the experience, quality and service to back it up.

If you require powder coating, Mad Scientist Header Coating recommends PowderTech PowderCoating, www.powdertech.biz, powder coating experts since 1994.

Ship parts to: MAD SCIENTIST HEADER COATING 1912 Townline Road Union Springs, New York 13160 If you have any questions, feel free to call us at 315-252-2113.

leftplaque